RTN
Technical DataThe 10 different sizes with high workloads offer a unit for nearly every manufacturing purpose..
Baugröße | A±0,1 | B | C | D max. | E | FH12 | G | H | ∅MH7 | O | Q | T | U | V |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
250 | 250 | 250 | 290 | 70 | 165 | 12 | 14 | 140 | 50 | M16 | 80 | 51 | 102 | 151,66 |
320 | 320 | 320 | 360 | 120 | 200 | 12 | 18 | 160 | 50 | M16 | 60 | 60 | 120 | 164 |
400 | 400 | 400 | 445 | 140 | 245 | 14 | 18 | 180 | 50 | M16 | 60 | 68 | 135 | 164 |
500 | 500 | 500 | 553 | 220 | 303 | 14 | 18 | 200 | 50 | M16 | 84 | 75 | 150 | 208,45 |
630 | 630 | 630 | 685 | 270 | 370 | 18 | 22 | 225 | 100 | M16 | 84 | 83 | 166 | 208,45 |
800 | 800 | 800 | 850 | 320 | 450 | 18 | 22 | 250 | 100 | M20 | 84 | 92 | 184 | 208,45 |
1000 | 1.000 | 1.000 | 1.030 | 380 | 530 | 22 | 22 | 285 | 100 | M20 | 84 | 103 | 206 | 208,45 |
1250 | 1.250 | 1.250 | 1.295 | 48 | 670 | 22 | 22 | 325 | 1000 | M20 | 100 | 117 | 234 | 225 |
1600 | 1.600 | 1.600 | 1.605 | 540 | 805 | 22 | 22 | 375 | 100 | M20 | 100 | 135 | 270 | 225 |
2000 | 2.000 | 2.000 | 2.020 | * | * | * | * | * | * | * | * | * | * | * |
*Maße und Belastungen für RTNW-Ausführungen auf Anfrage.
size | max. table load (centrical) | max. axial-force in total |
tilting moment | max. holding torque | max. permissible drive torque | reduction ratio | max. speed | weightt | spindle bore | ||
---|---|---|---|---|---|---|---|---|---|---|---|
size | vertical spindle | horizontal spindle with counter support | horizontal spindle (RTNW only) |
rotating axis | rotating axis | hydraulic at 100 bar | on face plate |
reduction ratio worm drive | short term for positioning only |
w/o motor |
max. |
mm | kg (max.) | kg (max.) | kg (max.) | N (max.) | Nm | Nm | Nm (max.) | i | min-1(max.) | kg(ca.) | mm |
250 | 320/630 | upon request | upon request | 20.000 | 3.200 | 1.600 | 400 | 90:1 | 22 | 80 | 70 |
320 | 500/1.000 | upon request | upon request | 32.000 | 5.000 | 2.500 | 630 | 90:1 | 22 | 130 | 120 |
400 | 800/1.600 | upon request | upon request | 50.000 | 8.000 | 4.000 | 1.000 | 90:1 | 22 | 190 | 140 |
500 | 1.250/2.500 | upon request | upon request | 80.000 | 12.500 | 6.300 | 1.600 | 90:1 | 22 | 360 | 220 |
630 | 2.000/4.000 | upon request | upon request | 125.000 | 20.000 | 10.000 | 2.500 | 90:1 | 22 | 500 | 270 |
800 | 3.200/6.300 | upon request | upon request | 200.000 | 32.000 | 16.300 | 4.000 | 90:1 | 22 | 875 | 320 |
1000 | 5.000/10.000 | upon request | upon request | 320.000 | 50.000 | 25.000 | 6.300 | 144:1 | 13,5 | 1500 | 380 |
1250 | 8.000/16.000 | upon request | upon request | 500.000 | 80.000 | 40.000 | 10.000 | 144:1 | 13,5 | 2500 | 480 |
1600 | 10.000/20.000 | upon request | upon request | 800.000 | 125.000 | 63.000 | 16.000 | 180:1 | 11 | 3500 | 540 |
2000 | 12.000/20.000 | upon request | upon request | 1.000.000 | 150.000 | 75.000 | 20.000 | 256:1 | 8 | Auf Anfrage | * |
size | indexing accuracy (± in arc seconds) |
repeatability | runout | true run out | parallelism | rectangularity | ||||
---|---|---|---|---|---|---|---|---|---|---|
face plate Ø | with indirect measuring system | with direct measuring system | indirect | direct | centre bore | face plate | face plate to base | distance 300 mm |
||
mm | NEG | d-A | d-AA | d-AAA | NEG | d-A, d-AA, d-AAA | mm | mm | mm | mm |
250 | ±15″ | ±5″ | ±2,5″ | n.a. | ±3″ | ±1″ | ≤0,01 | ≤0,01 | ≤0,01 | ≤0,015 |
320 | ±15″ | ±5″ | ±2,5″ | n.a | ±3″ | ±1″ | ≤0,01 | ≤0,01 | ≤0,01 | ≤0,015 |
400 | ±15″ | ±5″ | ±2,5″ | ±1,5″ | ±3″ | ±1″ | ≤0,01 | ≤0,01 | ≤0,01 | ≤0,015 |
500 | ±10″ | ±5″ | ±2,5″ | ±1,5″ | ±3″ | ±1″ | ≤0,01 | ≤0,01 | ≤0,01 | ≤0,015 |
630 | ±10″ | ±5″ | ±2,5″ | ±1,5″ | ±3″ | ±1″ | ≤0,01 | ≤0,01 | ≤0,01 | ≤0,02 |
800 | ±10″ | ±5″ | ±2,5″ | ±1,5″ | ±3″ | ±1″ | ≤0,01 | ≤0,01 | ≤0,01 | ≤0,02 |
1000 | n.a. | ±5″ | ±2,5″ | ±1,5″ | n.a. | ±1″ | ≤0,01 | ≤0,015 | ≤0,015 | ≤0,02 |
1.250 | n.a. | ±5″ | ±2,5″ | ±1,5″ | n.a. | ±1″ | ≤0,01 | ≤0,015 | ≤0,015 | ≤0,02 |
1.600 | n.a. | ±5″ | ±2,5″ | ±1,5″ | n.a. | ±1″ | ≤0,01 | ≤0,02 | ≤0,02 | ≤0,02 |
2.000 | n.a. | ±5″ | ±2,5″ | ±1,5″ | n.a. | ±1″ | ≤0,01 | ≤0,02 | ≤0,02 | ≤0,02 |