TANiP-S
Technical DataThe 4 different sizes available cover a certain spectrum of machining possibilities and applications.
size | A±0,01 | B | C | D* | E | ∅G | ∅Hh6 | ∅JH6 | K | L | M | N | P | R | S | T | U | V | W | W1 | W2 | Z |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
80 | 100 | 178 | 100 | * | 127 | 48 | 60 | 24 | M6(4x) | 64,50 | 37,25 | 180 | M4(4x) | – | – | 29,5 | 6,5 | 20 | 90° | 7° | 20° | 12 |
100 | 110 | 230 | 130 | * | 161 | 65 | 80 | 32 | M8(4x) | 70 | 49 | 210 | M5(4x) | 64 | 43 | 50 | 8 | 20 | 90° | 7° | 10° | 12 |
125 | 125 | 260 | 160 | * | 186 | 67,5 | 125 | 50 | M8(4x) | 82 | 50 | 250 | M8(4x) | 140 | 67,50 | 80 | 8 | 20 | 90° | 7° | 8° | 14 |
160 | 160 | 358 | 200 | * | 216 | 85 | 150 | 65 | M10(4x) | 105 | 67,60 | 320 | M8(4x) | 160 | 85 | 100 | 8 | 30 | 90° | 10° | 12° | 14 |
*dimension D = according to motor type used
size | max. load (centrically) | total axial force | tilting moment | holding torque | reduction ratio | speed | weight | spindle bore | ||
---|---|---|---|---|---|---|---|---|---|---|
size | vertical spindle | horizontal spindle and tailstock | horizontal spindle | rotating axis | rotating axis | pneumatic at 6 bar | worm-drive | short term speed for positioning only | w/o motor | ∅ |
mm | kg (max.) | kg (max.) | kg (max.) | N (max.) | Nm | Nm | i | min-1(max.) | kg(ca.) | mm |
80 | 40 | 35 | 20 | 3.000 | 250 | 100 | 45:1 | 66 | 12 | 24 |
100 | 125 | 90 | 45 | 10.000 | 350 | 130 | 56:1 | 53 | 21 | 32 |
125 | 260 | 165 | 85 | 15.000 | 1.200 | 320 | 72:1 | 42 | 36 | 50 |
160 | 650 | 300 | 150 | 30.000 | 3.300 | 330 | 72:1 | 42 | 56 | 65 |
size | indexing accuracy (± in arc seconds) | repeatability | concentricity | runout | parallelism | rectangularity | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
size | with indirect measuring sytem | with direct measuring system (system accuracy) | indirect | direct | spindle nose | spindle bore | spindle nose | 300 mm | 300 mm | ||
mm | NEG | d-A | d-AA | d-AAA | NEG | d-A, d-AA, d-AAA | mm | mm | mm | mm | mm |
80 | ±45″ | n.a. | n.a. | n.a. | ±3″ | n.a. | ≤0,01 | ≤0,01 | ≤0,01 | ≤0,015 | ≤0,015 |
100 | ±30″ | n.a. | n.a. | n.a. | ±3″ | n.a. | ≤0,01 | ≤0,01 | ≤0,01 | ≤0,015 | ≤0,015 |
125 | ±15″ | n.a. | n.a. | n.a. | ±3″ | n.a. | ≤0,01 | ≤0,01 | ≤0,01 | ≤0,015 | ≤0,015 |
160 | ±15″ | n.a. | n.a. | n.a. | ±3″ | n.a. | ≤0,01 | ≤0,01 | ≤0,01 | ≤0,015 | ≤0,015 |